MACHINERY

  • Warmy

    Thanks to the experience of more than 70 years’ activity, the MANFREDI preheating furnaces for casting rings are equipped with the most updated and reliable control systems, while remaining extremely easy to use. The heating chamber (available in two different sizes) is made up of 4 separate heating plates for a higher thermal endurance.The heating muffle profile increases the radiant surface for a higher thermal efficiency; ensures a uniform distribution of the heat and facilitates the removal of liquid waxes, thus avoiding their burning inside the casting ring.

  • AM 28 suction unit

    AM28 suction unit can be used on sandblasters, microsandblasters, workbenches, high speed grinders and any other situation where it is necessary to have a powerful, silent and adjustable suction unit.

  • BELT30

    €328.18 (€269.00 tax excl.)
    • Motor: Brushless
    • Max speed: 30000rpm
    • Over 25 hours operation
    • Charging: 3h
    • Battery: 2600mAh 12V
    • Rotation: D&S/R&L
    • Auto-stop for overload
    • Portable
  • MBR35

    €206.18 (€169.00 tax excl.)
    • Motor: Brush
    • Max speed: 35000rpm
    • Torque: 2.8 N.cm
    • Output: 65W
    • Hand/Foot speed rotation
    • Rotation: R&L
    • Auto-stop for overload
  • MBL60

    €559.98 (€459.00 tax excl.)
    • Motor: Brushless
    • Max speed: 60000rpm
    • Torque: 9.2 N.cm
    • Output: 250W
    • Large LCD display
    • Hand/Foot speed control
    • Rotation: R&L
    • Self-Diagnosis
    • Auto-stop for overload
  • MBL50

    €505.08 (€414.00 tax excl.)
    • Motor: Brushless
    • Max speed: 50000rpm
    • Torque: 8.0 N.cm
    • Output: 230W
    • Hand/Foot speed control
    • Rotation: R&L
    • Auto-stop for overload
  • M2line

    Silent and reliable 2-speed bench-type polishing lathe. Equipped with safety device against any accidental start of the motor.

    The double speed allows an efficient performance both during removal operations (low speed), and polishing operations (high speed).

  • Aspyclean

    Suction unit for dental polishing lathe machines, highly ergonomic, allowing the operator to perform easily and safely all the polishing operations. The powerful and silent suction system with built-in filters guarantees a healthy work environment.

    The equipment is provided with double workstation with the possibility of excluding one station and double the suction capacity on the other. The intense lighting of the working area and a capacious brush holding compartment complete the outfit.

  • Hydronepheles

    Hydronepheles are steam generators expressly designed for the dental laboratory,and provided with a capacious boiler entirely in stainless steel. The high thermic insulation and the immersion resistance grant high performances with reduced power consumption. A specially provided valve cap prevents the boiler opening under pressure and protects the equipment from the danger of overpressure.

  • Nepheles

    Nepheles are steam generators expressly designed for the dental laboratory,and provided with a capacious boiler entirely in stainless steel. The high thermic insulation and the immersion resistance grant high performances with reduced power consumption. A specially provided valve cap prevents the boiler opening under pressure and protects the equipment from the danger of overpressure.

  • TG line

    TG Line è uno squadramodelli ad acqua silenzioso e robusto espressamente studiato per le esigenze del laboratorio odontotecnico dove la velocità medio-bassa garantisce una efficace levigatura della superfice del modello riducendo al massimo l’impasto del disco abrasivo.

  • Cutty

    CUTTY is the high speed grinder ideal for any model casting technique laboratory; combining strength and practicality for rapid cutting and polishing operations.

    The special design of the spindle allows the replacement of the tool without stopping the motor, thus avoiding any work break, saving therefore time.

    Adjustable spindle position speed rotation up to 26.000 rpm.

  • Chisy 6

    CHISY 6 is a multifunctional pneumatic chisel, exclusively designed for the dental laboratories. Powerful enough to remove even the hardest investments.

  • Syloplaster

    Electric silo for 25 Kg plaster. The internal container rubber is sealed to avoid the spoiling of plaster caused by moisture infiltrations. When the pouring diaphragm below is opened, the vibration of the internal investment starts automatically, ensuring a constant flowing of plaster, thus avoiding any lumping or clogging.

  • Mixygel K

    The model duplication is a delicate step of the framework production process where a precise, sturdy and silent machine as MIXYGEL K is a basic requirement. It has been designed in compliance with the working loads experienced in the dental labs. With a modern and ergonomic design, it is entirely built in metal to ensure solidity and duration.

    Mixygel K is equipped with a powerful and silent motor, and a thermal cycle operating digital control to obtain a complete mixing and a uniform distribution of the heat in the gelatine.

  • Dewax

    Steam heating tank, DEWAX 5 is used to remove wax from cylinders and flasks, to reduce fumes emission during the pre-heating phase, or as soft water bath for plastic materials. DEWAX 5 can work at a temperature from 30°C up to 90°C.The tank, entirely in stainless steel, has a capacity of 4 lt (corresponding to 6 large half flasks, or to 6 casting rings model 6X).

  • Acrydig 6-12

    ACRYDIG polymerizing units are completely built in stainless steel to guarantee a longlasting life. The special design of the closing lid avoids any dispersion of steam or condensate dripping, thus ensuring the polymerization cycle in a steam saturated atmosphere. The wide opening and the adequate dimensions of the polymerization tank allow a rational accomodation of the flasks. The electronic board controls one-step or two-step polymerization cycles, a pre-start setting, the automatic switch off at the end of the cycle and constantly shows the cycle progress.

  • Abrasives for...

    Decades of experience of Reddish Stone group in the field of abrasives have led to the selection of the best products in order to satisfy all the needs of the dental technician laboratory. The production process guarantees a high quality, constant through time. The rigid plastic containers protect the product from transport damages. The packaging in a controlled environment as well as the use of hermetic closing seals ensure its correct preservation with absence of humidity.

    Aluminium oxide (Al2O3) and glass Microbeads are available in 5Kg and 25 Kg tanks.

  • Glass protection

    Glass Protection 16B (5pcs) cod. 80003315
  • Spare filters for AM28

    FB4 – Spare filters for AM28 (4pcs) cod. 60410100

  • L7B

    The B model is available with two different chamber sizes. The microprocessor instrumentation offers a great flexibility in programming the heating cycle, setting the following parameters: delayed start setting, heat rate control, final stabilization temperature, program progress shown on the lcd display and on the leds.

  • Oxyker DUET

    Professional micro-sandblasting 2 modules, for the use of abrasives with different meshes (from 50 to 250μ) at a time. Each module is equipped with an ergonomic handle for a secure and easy grip, and with an easy-to-reach internal selector to choose the correct abrasive for any working process without taking out the hands from the sandblasting room. The shape and the effective lighting of the sandblasting chamber, as well as the total transparency of the tempered glass allow the operator to work with a comfortable posture and a total view on the workpiece. A protection film guarantees the longlife of the glass and makes the cleaning easier. The whole Oxyker range is equipped with a magnetic door closure and with an easy suction pipe connection thus avoiding any dust or abrasive leakage.

  • Oxyker TRIO

    Professional micro-sandblasting 3 modules, for the use of abrasives with different meshes (from 50 to 250μ) at a time. Each module is equipped with an ergonomic handle for a secure and easy grip, and with an easy-to-reach internal selector to choose the correct abrasive for any working process without taking out the hands from the sandblasting room. The shape and the effective lighting of the sandblasting chamber, as well as the total transparency of the tempered glass allow the operator to work with a comfortable posture and a total view on the workpiece.

    A protection film guarantees the longlife of the glass and makes the cleaning easier. The whole Oxyker range is equipped with a magnetic door closure and with an easy suction pipe connection thus avoiding any dust or abrasive leakage.

  • Oxyker QUARTETTO

    Professional micro-sandblasting 4 modules, for the use of abrasives with different meshes (from 50 to 250μ) at a time. Each module is equipped with an ergonomic handle for a secure and easy grip, and with an easy-to-reach internal selector to choose the correct abrasive for any working process without taking out the hands from the sandblasting room. The shape and the effective lighting of the sandblasting chamber, as well as the total transparency of the tempered glass allow the operator to work with a comfortable posture and a total view on the workpiece.

    A protection film guarantees the longlife of the glass and makes the cleaning easier. The whole Oxyker range is equipped with a magnetic door closure and with an easy suction pipe connection thus avoiding any dust or abrasive leakage.

  • Silox K

    Independent sandblasting module, complete with pressure regulator. Easy control of the sand supply through a footswitch. Standard-equipped with a 1.2mm size nozzle. Other nozzle sizes available: Ø 0.8mm and 1.5mm

  • Mixyvac S

    MIXYVAC S is a mixer for plaster and investments.

    Extremely ergonomic, it can be wall-mounted or placed on a work bench. Inside the frame, entirely in metal, a powerful and silent vacuum pump can be activated in “deferred mode” to avoid the suction of dusts and the consequent clogging of the filter. The high torque motor grants a homogeneous mixing of any type of dental investment or plaster. The digital instrumentation enables a fast and intuitive programming of the working cycle. Mixyvac S is equipped with an analogic vacuum gauge and with a 170cc mixing bowl. Accessorised with a larger bowl (560cc).

  • Clamp and Flasks

    Sturdy and reliable, the OL463 press can host 3 flasks at a time, exerting a working pressure of 200bar maximum, even though is it built to bear a working load of max.400bar. Equipped with oil-pressure closed circuit, OL463 does not need periodical oil filling up.

  • Smallcast

    Technically equivalent to Millennium, Smallcast represents the best synthesis of casting power with compact sizes, with the possibility of choosing the most suitable installation system depending on each dental laboratory needs.

    Smallcast can be equipped with an external cooling system or can be directly connected to the water supply of the laboratory.

  • Millennium

    Millennium is the synthesis of 60 years experience in the induction microcasting sector.

    Expressly designed for precious and non-precious alloys casting in atmosphere, Millennium enables very reduced casting times (30 gr Cr-Co in 60 secs.only !!) and heavy duty working loads thanks to the solid-state generator type EBST (Electronic Board Selected Tolerance – available only in the “HD” versions) granting up to 40 continuous castings.

  • Odontoweld

    Odontoweld is a multifunctional equipment – practically two machines in one – used as spot-welder or as brazing device, to fix, spot-weld and braze quickly and accurately on non-precious metal prostheses.

  • Orthoweld

    Orthoweld is a spot-welder expressly designed for non precious alloys used in orthodontic applications.

    Orthoweld is equipped with a 12-position power regulator and thanks to a continuous adjustment of the pulse time it is suitable for any orthodontic problem.

  • Fili saldatura

    Filo per saldature a laser in lega di Cromo-Cobalto o Titanio, ottimizzati per una eccellente adesione con materiali ceramici dentali.
    Bobine da 2 mt.

    CRCO WIRE 025 cod. 72000025
    CRCO WIRE 035 cod. 72000035
    CRCO WIRE 050 cod. 72000005
    TI WIRE 025 cod. 72050025
    TI WIRE 035 cod. 72050035
    TI WIRE 050 cod. 72050005